Other Brands Products

New Acidulated Phosphate Fluoride (APF) Formulation with low pH for maximal fluoride uptake within 60 seconds:

• 1,23 % Fluoride Ion Thixotropic Gel
• Thixotropic gel for maximal contact to all tooth surfaces
• Natural Vitamin E content as antioxidant and desensitizer

Dentsply AH Plus Root Canal Sealing Material is a two-component paste/paste root canal sealer based on epoxy-amine resin. The AH Plus sealer shows extremely low shrinkage making it a suitable choice of material to seal the root canal.


Features:

• Long term sealing properties.
• Outstanding dimensional stability.
• Self-adhesive properties.

Directions For Use:

• To be used with hot or cold technique. AH Plus achieves a tight seal due to its self-adhesive properties and dimensional stability.
• It is biocompatible and exhibits moderate anti-microbial properties and therefore has the potential to significantly reduce the germ load in the canal.
• It is extremely radio-opaque so it is clearly visible on radiographs.
• AH Plusis a good sealer choice for use with ProTaper Thermafil obturators as the setting reaction is not adversely affected by thermoplastic obturation.

Contents:

• 1 x Tube of paste A.
• 1 x Tube of paste B.

Surface Strengthening Effect:

• Research has shown that a strontium-based glass ionomer placed in calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer surface achieving a surface strengthening effect. All GC Gold Label Glass Ionomer strengthens over time in saliva.

A Consistent Predictable Seal:

• All GC Gold Label Glass Ionomer will display a glossy surface after mixing. This indicates sufficient free polyacrylic acid is available to begin the ion exchange process. The subsequent movement of ions between dentin, enamel and GC Glass Ionomer creates an ion exchange zone which chemically fuses them together. The resulting seal is consistent, predictable and long lasting.

Benefits:

• Allows minimal cavity preparation.
• Less stress on margins and marginal seal.
• Protects against secondary caries.
• Promotes internal remineralization and surface strengthening.
• Easy post-operative diagnosis.
• Easier mixing and sharper setting makes it so easy to use.
• Final finish may be completed under water 15 minutes from start of mix
• Matches to natural tooth structure.
• Good colour match to tooth structure.
• More durable, longer lasting restorations.
• Assurance of successful restorations.

Features:

• Chemical bond to tooth structure.
• Tooth-like coefficient of thermal expansion.
• High fluoride release.
• Strontium based.
• Good radiopacity.
• Excellent handling characteristics.
• Reduced moisture sensitivity.
• Translucent material.
• Range of 3 shades: #21 Pale Yellow, #22 Yellow Brown and #23 Dark Gray.
• Low solubility.
• Long term clinical data.

GC Fuji IX GP EXTRA is the latest addition to the well established family of glass ionomers that offer unsurpassed wear resistancy, compressive strength, and durability. GC Fuji IX GP EXTRA is the fastest setting glass ionomer on the market. While maintaining the ample working time of GC Fuji IX GP FAST (1 1/4 minutes), GC Fuji IX GP EXTRA allows final finishing in only 2 1/2 minutes from initial mix.The faster final set saves valuable chair time which provides improved stability against water, an important feature in challenging oral environments.

This product contains a next generation glass filler, SmartGlass™. The filler elicits higher translucency, fluoride release, reactivity and a faster setting time. The unique optical properties of the new filler have also allowed GC America to create a new, lighter shade; B1 is ideal for children and patients who may have undertaken whitening procedures.

FEATURES :-

• EXTRA fast setting.
• Finishing in only 2 1/2 minutes.
• EXTRA high fluoride release.
• Six times higher than the current GC Fuji IX GP FAST.
• EXTRA translucency.
• Allows improved aesthetics and shade matching.
• EXTRA strong.
• Maximizes durability for optimum performance.

Filtek ™ Z350 XT is a dental restorative composite designed for use in anterior and posterior restorations.The kit of restoratives are available in Dentin, Body, Enamel and Translucent shades packaged in syringes and single-dose capsules. All shades are radiopaque. A dental adhesive, part of the kit, is used to permanently bond the restoration to the tooth structure.

Filtek ™ Z350 XT Universal and Flowable Restorative is brought out by 3M ESPE using the nanotechnology with the following unique properties :

• Bonded nanofillers are the reason Filtek ™ Z350 XT restorative dental kit has bonded nanofillers help retain its brilliant polish.
• Filtek ™ Z350 XT restorative is proved to be superior by its polish retention because of the patented process used in building the nanocomposite, compared to other composites and microfills.
• In-vitro lab data has shown that the wear resistance of Filtek ™ Z350 XT restorative is equivalent to Filtek ™ XT restorative providing the confidence to use it anywhere in the mouth.
• 'True' nanotechnology used in making Filtek ™ Z350 XT nanofill flowable dental restorative personalized kit provides wear resistance similar to enamel.
• A 5 year clinical study has revealed that statistically there is no significant difference between Filtek ™ Z350 XT Universal Restorative and natural enamel.
• The restoration to maintain a smoother surface, meaning the initial impressive gloss will last for years due to the creation of unique clusters of nanometer-sized particles. It is because the nanoclusters shear at a rate similar to the wear of the surrounding resin matrix during abrasion

Filtek ™ Z350XT is very reliable to use due to its high performance as it is also a versatile nanocomposite. While it provides excellent aesthetics for anterior restorations, it offers strong enough posterior restorations.

Filtek ™ Z350XT is very unique as it is :

• Simple to use.
• Provides natural aesthetics.
• Superior nanofiller technology.
• Wears natural Enamel look.

Specifications:

• A visible light-activated composite.
• The restorative is available in a wide variety of Dentin, Body, Enamel and Translucent shades.
• Can be used for direct anterior and posterior restorations (including occlusal surfaces).
• Low-viscosity, radio-opaque flowable nanocomposite.
• Filtek ™ Z350 XT Flowable uses the same unique nanotechnology as Filtek ™ Z350 XT Universal dental restorative products which provides excellent aesthetics, unsurpassed polish retention and low wear.

Contents:

• Filtek Z350 XT Body Shade Syringe x 4g syringes (A1 A2 A3 A3.5).
• 1 x 2g Flowable Restorative Paste.
• 1x 3 ml Single Bond Universal bottle.(7th Generation Bond).

IRM® is a reinforced zinc oxide-eugenol composition for intermediate restorations lasting up to one year:

• For temporary restorations.
• Base material.

Clinical uses:

• It is an intermediate restorative material. In a clinical study it was compared to other ZOE (Zinc Oxide- Eugenol) compositions and an EBA (Eugenol and o-ethoxybenzoic acid) formulation. Result: it was judged superior for both Class I and II restorations ( at one and two year observations).
• Among the many applications are Restoration of deciduous teeth (when permanent teeth are two years or less from eruption); restorative emergencies; caries management program; dental school clinics and public health dental programs.

Handling characteristics:

• IRM® powder and liquid should be mixed in less than one minute. The resulting putty consistency is then inserted into the cavity. If indicated, conventional methods of matrix application are appropriate.

Features:

• Excellent adhesion to both tooth and metal.
• Biocompatibility and a tooth-like coefficient of thermal expansion reduces the risk of post-operative sensitivity.
• Good mixing properties results in a smooth creamy mix with good flow.
• Film thickness of just 15 microns makes complete seating of crowns easy.
• Extended working time with sharp set.
• Long term fluoride release.
• Many years of documented clinical success.

Indications:

• Final cementation of metal or porcelain fused to metal crowns & bridges.
• Cementation of stainless steel crowns and orthodontic bands.
• Lining under restorative materials.

How to Use:

• Mix to the correct powder:liquid ratio
• (20 seconds for Gold Label 1)
• Apply the mixed cement to both restoration and prepared tooth
• Seat the restoration within 30 seconds of completing the mix
• Remove the excess cement during the gel stage
• Total setting time is 4’30” after start of mix
• After final set, moisture proof the margin by applying a final coat of GC Fuji Varnish or GC Fuji Coat LC

• Chemical adhesion to tooth structure allows minimal cavity preparation without the need for etching or bonding agents.
• Chemical setting without shrinkage allows single step placement without layering.
• Similar thermal expansion as tooth structure produce minimal stress on the marginal seal.
• Strontium based glass provides good radiopacity and snap-set characteristics unanimously preferred by clinicians.
• Strontium based fluoride releasing formulation contributes to internal remineralization within tooth structure as well as increasing surface strength over time.
• High compressive and flexural strength, and 60% higher wear resistance than conventional glass ionomers makes Gold Label 9 strong enough for use in posterior teeth.
• Indications for Gold Label 9.
• Class I and small Class II restorations in non-load bearing areas.
• Class I and Class II restorations in deciduous teeth.
• Transitional restorations.
• Base / Core build-ups.

Indications:

• Permanent cementation of inlays, onlays, crowns and bridges made of metal or porcelain-fused to metal (PFM), all-aluminia or all-zirconia strengthened core ceramic systems (e.g. Lava™ Crowns & Bridges).
• Permanent cementation of endodontic posts and orthodontic appliances made of metal.
• Cavity lining.

Features:

• Low film thickness.
• Radiopaque.
• Fluoride release.
• Working time (including mixing): 3:30 min.
• Setting time (from begin of mix): 7:00 min.
• High level of biocompatibility.
• Simple and user-friendly cementation material.

• Go beyond versatile. Discover the universal bonding solution with Single Bond Universal Adhesive
• Combined Total-Etch, Self-Etch and Selective-Etch adhesive.
• Consistent bond strength to both moist and dry etched dentin.
• Virtually no post-op sensitivity.
• Flexible dispensing tip can be individually adjusted before application.
• High bond strength to all indirect surfaces (zirconia, alumina, glass ceramics and metals) without a separate primer.
• Excellent marginal integrity for highly esthetic restorations.
• One-step, one-coat adhesive application.
• Self- and dual-cure compatible with (Scotchbond™ Universal DCA Dual Cure Activator)
• No refrigeration needed, store at room temperature for two years.

Features:

• One-bottle, one-coat convenience.
• Proven long-term bond strength.
• Virtually NO post-operative sensitivity.
• 35-second placement time reduces risk of contamination.
• Moisture tolerant - works on wet or dry enamel and dentin.
• Uniquely suited for the "selective" etch technique.
• Low microleakage.
• Refrigeration not required (if used within 6 months).

• Comfortable and easy delivery
• Simple and time-saving one-step solution
• High-performing self-adhesive resin cement

Also available in the Clicker™ Dispenser:

• Delivers pre-measured doses for consistent and economical mixing
• Choice of dispensed amount – 11 g dispensed in 80 clicks (approx. 40 applications)
• Improved mixing through new technology

Z250 XT Nano Hybrid universal dental restorative kit is specifically designed to offer easy to polish and providing good aesthetic result. It permanently bonds the composite to the tooth structure. It is available in 12 shades, two of which are Opaque. All shades are radiopaque and fluorescent. Z250 XT is made available as syringes and capsules.
Nanohybrid composites offer a reliable solution for a wide range of dental restorative needs. They contain a broad range of particle sizes for higher filler loading, which leads to strength that’s similar to a traditional hybrid. The addition of nano-sized particles gives the restoration better wear resistance and a surface that is easier to polish for good esthetic results.

Features :

• High strength
• Good wear resistance
• Improved polish retention
• Easy to polish
• Direct anterior and posterior restorations including occlusal surfaces
• Core build-ups
• Splinting
• Indirect restorations including inlays, onlays and veneers

• Filtek Z250 XT Nanohybrid 4 x 3g syringes (A1 A2 A3 A3.5)
• Single Bond Universal - 3ml
• Accessories

3m GIC is a perfect solution for treating any kind of patient

Not every patient is same – and that''''s another important reason for differentiated therapy. Depending on each patient group''''s needs, your daily practice faces different typical demands: 3M ESPE glass ionomers make it easy for you to respond to the needs and wishes of very different patient groups. They allow you to provide immediate help in a wide range of situations, and thus give you more time to get to the root of the real problem (for example, periodontal disease or a high risk of caries) and find the right solution. And that means satisfied patients and less stress for you.

• Quick and easy to use with children.
• Excellent mechanical properties for posterior teeth
• Bulk-fill convenience.
• Ketac Molar Quick - for fast setting posterior restorations

• High flexural strength,reduces the risk of restoration fracture.
• Adhesion to enamel and dentin.
• Long-term fluoride release.
• Low acid erosion.
• Radiopaque.
• Cost-effective.

• 1 x 15 gm Powder.
• 1 x 7.8 ml Liquid.
• 1 x Mixing Pad.
• 1 x Plastic Scoop.

Periodontal Dressing in tubes
Two component material for wound dressing, to cover stitches or to stabilize loose teeth.

FEATURES :-

• Easily mouldable.
• Elastic consistency.
• Patient friendly.
• Supports process of healing.
• Eugenol free.
• Compatible with resins.

HOW TO USE :-

• Regular Set: ready for use within 3 min., setting time 30 min.
• Hard & Fast Set: ready for use within 1 min., setting time 10 min.

CONTENTS :-

• GC Coe Pak For Periodontal Dressing 

Indications:

• Temporary restorations, especially inlay preparations.
• Temporary fillings.
• Filling implant sites.
• Relining temporary prefabricated crowns and bridges.

Features:

• Proven filling material for temporary fillings.
• Removable completely without burs.
• Simple to apply with filling instrument.
• Quick and void-free curing in a moist environment.

Clinpro™ Tooth Crème 0.21% w/w Sodium Fluoride Anti-Cavity Toothpaste is an advanced formula containing an innovative tri-calcium phosphate ingredient and is available exclusively from 3M ESPE. The optimized formula makes Clinpro Tooth Crème an outstanding choice. It contains fluoride as well as calcium and phosphate, which are components naturally found in saliva.

This proprietary formula successfully integrates these components, enhancing, rather than compromising, the product's performance. During the manufacturing process, a protective barrier is created around the calcium allowing it to coexist with the fluoride ions. Think of this as a bubble that transports the Tri-Calcium Phosphate to the teeth. As the toothpaste comes in contact with saliva during brushing, the barrier breaks down and makes the calcium, phosphate and fluoride readily available to the tooth. The tooth naturally absorbs these components, helping to prevent the initiation and further progression of demineralization and allowing remineralization to occur. The illustration below shows this system in action.

Packing : 113 Gms / 24 Gms